Freezing or Glitchy pic. This really is caused when operating the Sky card in cc Cam when Global Access EMM's are not blocked. You should definitely set up the blockGA parameter to YES. A slow ECM time in far more than 0.400 seconds will also induce this condition even though we have no real verification of what definitely results in a slow response time whenever using a local card. Remarks about this please ?
Entitlements Not Updating. As stated, the use of CCCam it is best to have one or more client hooked up using MGCamd and using the AU parameter = One in the mf.cfg config file. It'll allow for MGCamd to replace the entitlements.
Entitlements in NewCS definitely not displaying whatsoever. Your current card has not been up to date together with the entitlements time has expired. If you're able to, put it back inside the original Sky box as well as put it on channel 106 ( sky1 ). Let it stay on till it appears alive, it may take upto Two days !!! If you can't have got the original box set-up an MGCamd client and try it that way. At present this procedure isn't really demonstrated operating.
CC Cam shows the incorrect or no CAID. That is certainly possibly the boxkey is mistaken. Be sure that you have produced the correct boxkey making use of the serial number from your original Sky box.
Config File Settings
Shown down below is the files that's required to use each settings. Observe a bit of variations relating to E1 and E2 receviers. You can find more helpfiil information on ultraspecialization from openbox s9 hd pvr fta satellite receiver.
CCcam 2.1.3 - Do the installation with the blue panel - Host & Client
CCcam.cfg - /etc ( E2 boxes )
CCcam.cfg - /var/etc ( E1 boxes )
NewCS 1.67RC1 & MGCamd 1.31 - Host & Client
newcs.xml - /var/tuxbox/config( All boxes )
mg.cfg - /var/keys ( All boxes )
newcamd.list - /var/keys ( All boxes )
NewCS 1.67 & CCcam 2.x.x
I can't help but recommend NOT applying this configuartion at the present time because you have trouble with the card entitlements running out and you'll have to restore the card using some other technique.
Installing CC Cam personally ( pcsc or usb supported binary )
newcs.mips.pcsc - /usr/bin ( E2 recievers )
newcs.ppc.pcsc /var/bin ( E1 receiversboxes ) I believe?