You probably have updated your Sky+ box for a latest Sky+ HD reciever you may have the option of getting your hardware set up by way of qualified Sky expert additionally, you can make a decision to set up the gear your self. You may choose to go to Openbox S11 Hd Pvr Recording for more information on quantom house.

If you've ever recently up-graded to a new Sky box and chosen the Self Install option this article could very well give you support in installation of and initiating a brand new equipment. There isn't any longer any requirement for you to contact us to activate your own viewing card may possibly all be accomplished online at any given time you want.

Do-it-yourself Installations : Sky+HD

To connect Sky+ HD you'll require :
• A Sky+HD reciever
• A HD/HD Ready Television (to benefit from the High Def Tv channels)
• An HDMI cable (To plug in your own Tv along with Sky+ HD reciever to recieve High definition channels)
• One or Two Dish Input Connections ( To benefit from the entire features of Sky+ you will want 2 Dish Input Cables connected of one's Satellite dish to your own Sky+ HD box)
• Sky Viewing Card
Installation : Self Setup

To set up a Sky+HD box with a pair of dish input cable connections you need to carry out the below actions :

Notice that any recordings presently stored inside of your Sky+reciever aren't going to be transferred to your new Sky+HD box. Every recordings saved within the hard disc drive of your respective reciever won't be accessible. Any kind of video recordings will have to be seen or transferred to an alternative formatting (DVD / Hard Drive).

Disconnecting the outdated apparatus :

1. Disconnect your current Sky+ reciever from your mains power.
2. Unscrew the dish input cables from your Sky+ box
3. Remove the SCART cable hooked up between your T . v . and the Sky+ receiever
4. Get rid off your current Sky Viewing Card (The Sky viewing card could possibly be kept behind a flap about the front right-hand -panel on your Sky+ reciever).

Linking your newly purchased equipment :

1. Connect the two dish input cables on the Dish Input One and Dish Input Two connections around the rear of your Sky+ HD reciever.
2. Connect the HDMI cable into the HDMI slot in the rear of the Sky+ HD box together with the matching end attached to the HDMI slot in your Hdtv.
3. Link up your line in the phone outlet at the backside in the receiver.
4. Link up the Sky+ HD reciever on the mains power source
5. The Sky+ HD box will illuminate an amber/red light on the front panel on the receiver showing standby function. The box should remain in standby mode for Two mins prior to when powering up your box.
6. Power up your Sky+ HD box by pressing the Sky key on the Push-button Control
7. You can be presented with the Sky Information Channel onscreen (Channel 998)
8. With your Sky Remote control choose Channel 106 (Sky One)
9. You will be presented with an On Screen Message telling "Please insert your Sky Viewing Card"
10. Insert your Sky viewing card in the viewing card slot (the viewing card slot is available behind a flap on your front panel on the Sky+ HD reciever).
11. To fully activate your Sky+HD services and subscription programs you will require to couple your Sky viewing card on your all new equipment.